Gang Sheet Builder

Ranging from 2ft to 20ft, these gang sheets accommodate orders of all sizes. For beginners or those without design software, the Coastal Printworx Gang Sheet Builder is the perfect solution. With a user-friendly interface and an array of customization tools, building a gang sheet has never been easier. Simply upload high-resolution, print-ready artwork, adjust sizes, and easily duplicate images. The builder ensures optimal layout and provides seamless checkout, making it easy to create and order your DTF gang sheets. Embrace creativity and revamp your printing process with our DTF Gang Sheet Builder.

Features

• Auto Build: Build your gang sheet in seconds with our Auto Build feature. Simply upload your images, choose the quantity and size, and hit 'Apply.' The builder will automatically arrange your images, notify you if more sheets are needed, and confirm everything is correctly placed and high resolution before checkout.
• Streamlined Workflow: Simplify your printing workflow with our DTF Gang Sheet Builder. Design, arrange, and optimize your gang sheets effortlessly for a smoother production experience.
• Multiple Sizes: Build custom layouts that optimize space and streamline your printing process across five different sizes.
• Design Flexibility: Experiment with various design combinations on a single sheet. Our Gang Sheet Builder empowers you to explore creativity while maintaining precise print quality.
• Print with Confidence: Ensure consistent and vibrant results with your customized gang sheets. From intricate details to vivid colors, your prints will captivate every time.

We stand behind the quality of the transfers we print for you. If you are not satisfied, we will reprint with a new or revised file at no additional charge.

Learn More

To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps.

1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.

2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place. You’ll get a feel for when this is needed.

3. Press: Press your transfer with medium pressure at 305°F / 160°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time -- within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.

4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds).Once cool, lift the transfer from one corner and gently peel back. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows -- (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.

5. Final Press & Wash Instructions: Place the parchment paper included or a single layer of t-shirt material over the design and press again for 5 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.

To ensure the longevity of a garment with a Direct-to-Film (DTF) transfer, follow these specific care instructions. DTF transfers, though durable, can wear out prematurely if not washed and handled correctly. Here’s how to care for it:

1. Wait Before Washing

• After applying the DTF transfer, it’s best to wait at least 24 hours before the first wash. This allows the adhesive to fully set.

2. Turn the Garment Inside Out

• Turning the garment inside out protects the DTF print from friction against other items in the wash, which can cause fading or cracking.

3. Choose Cold or Lukewarm Water

• Use cold or lukewarm water (up to 90°F or 30°C). Hot water can weaken the adhesive and cause the print to peel or crack over time.

4. Select a Gentle Wash Cycle

• Set your washing machine to a gentle or delicate cycle to minimize agitation, which helps preserve the print.

5. Use Mild Detergent

• Use a mild, phosphate-free detergent without bleach. Avoid harsh chemicals, as they can damage the DTF transfer.

6. Avoid Fabric Softeners

• Fabric softeners can interact with the transfer and break down its adhesive, reducing its lifespan.

7. Skip the Dryer if Possible

• Air-dry the garment for the best results. If you need to use a dryer, tumble dry on low heat and remove the garment

All orders ship out the same or next business day. Orders over $150 will automatically qualify for Free Shipping.

Read our Shipping Policy for more information.

Refunds & Reprints

Contact us within 15 days of receiving your order to submit a request for a refund or reprint. We will reprint any order where there is a print quality or adherence issue. However, we will not issue a reprint if the uploaded file is low quality. If you'd like a refund or reprint for another reason, it must be approved by management first.

All file types accepted, vector files are always preferred, raster art should be at least 300 DPI.

Tip: If you're using Canva or Procreate, we recommend exporting your documents as PDFs